Name: Press Machine Process of Stainless Steel Composite Bottom Pan
Brand: SHANTOU JACKSON INTELLIGENT MACHINERY CO.LTD
SKU: JSP-4000T
Availability: InStock
Rating: 5 (1 reviews)

Home > COOKWARE LINE > Press Welding

Press Machine Process of Stainless Steel Composite Bottom Pan

Description Specification Review

Description

Advantages:

◎Frame: The frame of the J54-4000 40000KN double disc friction press requires sufficient strength and rigidity.A combined prestressed frame structure is adopted. There are positioning rings between the base, left and right columns, and beams for positioning, and four pull rods are electrically heated and pre-tightened to form a closed frame. Left and right support arms are installed at both ends of the upper part, which is convenient for installing the transmission device.

◎Transmission control system: The transmission is driven by double motors. There are two control cylinders installed at both ends of the transmission shaft, through which the air is fed into the cylinders to push the piston to move left and right, so that the left and right friction discs are alternately pressed against the flywheel, so that the flywheel drives the slider to move up and down, and the forging is completed, blow.

◎Flywheel: The press adopts an overloaded slipping flywheel. When overloaded, there will be relative sliding between the wheel body and the wheel rim to play a role of safety insurance.

◎The body of the slider is made of high-quality cast steel. The lower end of the screw in the slider is equipped with a nut. After the nut is tightened, a round pin is driven in to prevent loosening and falling out. The slider guide adopts a long X-shaped guide rail, which improves the guiding accuracy and enhances the anti eccentric load capacity of the product. The gap between the slider and the rack guide rail can be adjusted by means of adjusting the inclined iron.

◎Protection platform: This machine is equipped with a safety protection platform, which is the installation basis of the braking device. It is welded by channel steel and angle steel. There is also a rat cage ladder for the upper and lower platforms. It is convenient for the installation and maintenance of transmission control.

◎Braking system: The braking consists of two identical sets of braking devices, which is symmetrically installed on the platform. The upper part is tensioned by a tie rod, and the lower part is fixed on the platform by screws.

There are set screws on the platform to prevent the base from moving. When braking, the piston rod chamber of the cylinder is exhausted. When the rodless chamber is inhaled, under the joint action of spring force and compressed air, the piston rod pushes the brake plate through the shaft to press the outer edge of the flywheel, so as to achieve the purpose of braking.

◎Balance cylinder: The slider balance device is composed of two balance cylinders, which is symmetrically distributed on the front and back of the machine beam, and are used to balance part of the weight of the motion system, avoiding the sudden drop of the slider, making the slider move smoothly when it goes down, and is conducive to Slider return.

◎Ejection: Pneumatic double ejector rod structure is adopted, the ejection force is 20kN, and the ejection stroke is 200mm.

◎Air pipeline system: The air pipeline system is compressed air, which is used to provide power to the transmission control, brake opening and slider balance device. The pneumatic system is composed of an air storage tank, a reversing valve, a pressure reducing valve, a lubricator, safety valve etc.

◎Lubrication: The equipment adopts centralized automatic lubrication and decentralized manual lubrication. The four guide rails and the screw pairs of the main lubrication points use an electric pump and an automatic oil separator to automatically inject lubricating oil for lubrication. The cylinder is lubricated by automatic oil spraying with a lubricator installed in the air pipeline, and all other places that need to be lubricated are lubricated with oil guns or grease cups.

◎Foundation: The buyer invites a qualified civil engineering design institute according to the installation foundation drawing provided by the seller, and organizes the civil engineering construction after converting the design into construction drawings according to the local soil conditions. The thickness of the foundation cement pouring layer should be determined by the user after exploration according to the soil quality of the workshop. The foundation should have a waterproof layer to prevent groundwater from seeping into the pit.

◎Electric control system: It consists of a strong electric drive part and a PLC (OMRON) control part. The control circuit is reasonable, the movement is reliable, and it is easy to use. The main motor adopts star-delta starting mode, which reduces the impact of starting current.

Specification

Main Technical Parameter

Model	JSP-4000T
Function	Pressure Welding Process of Stainless Steel Composite Bottom Pan
Technology	Programmable Control System
Ton force	4000tons
Nominal force	40000kN
Slider Stroke	800mm
Stroke times(theoretical calculated value)	9times/min
Minimum die height	800mm
Height of workbench pad	300mm
Working table size:left and right	1300mm
Front and rear	2350mm
Dimensions of the bottom of the slider	1110mm(left and right)
Front and rear	2200mm
Ejection method	Pneumatic
Maximum ejection force of ejector	20kN
Maximum ejection stroke of ejector	200mm
Size	796155808960mm
Main motor power	185*-2kw
Peak Power	385kw
Voltage	three-phase AC: 380V(±10%)50Hz Three-phase four-wire single-phase AC: 220V(±10%)50Hz
Compressed air consumption	Consumes 1.2 cubic meters per hit
Air supply pipe diameter	≥40mm
Air supply pressure	≥0.5MPa

Review

Send your message to us

First Name

Last Name

* Email

Address

City

State

* Country

please select your country

Afghanistan
Aland Islands
Albania
Algeria
American Samoa
Andorra
Angola
Anguilla
Antigua and Barbuda
Argentina
Armenia
Aruba
Australia
Austria
Azerbaijan
Bahamas
Bahrain
Bangladesh
Barbados
Belarus
Belgium
Belize
Benin
Bermuda
Bhutan
Bolivia
Bosnia and Herzegovina
Botswana
Bouvet Island
Brazil
British Indian Ocean Territory
British Virgin Islands
Brunei Darussalam
Bulgaria
Burkina Faso
Burundi
Cambodia
Cameroon
Canada
Cape Verde
Caribbean Netherlands
Cayman Islands
Central African Republic
Chad
Chile
Christmas Island
Cocos Islands
Colombia
Comoros
Congo
Cook Islands
Costa Rica
Cote D'ivoire
Cuba
Curaçao
Cyprus
Czech Republic
Democratic People's Republic of Korea
Democratic Republic of the Congo
Denmark
Djibouti
Dominica
East Timor
Ecuador
Egypt
El Salvador
Equatorial Guinea
Eritrea
Estonia
Ethiopia
Falkland Islands
Faroe Islands
Fiji
Finland
France
French Guiana
French Polynesia
French Southern Territories
Gabon
Gambia
Georgia
Germany
Ghana
Gibraltar
Greece
Greenland
Grenada
Guadeloupe
Guam
Guatemala
Guernsey
Guinea
Guinea-Bissau
Guyana
Haiti
Heard Island and Mcdonald Islands
Honduras
Hong Kong, China
Hungary
Iceland
India
Indonesia
Iran
Iraq
Ireland
Isle of Man
Israel
Italy
Jamaica
Japan
Jordan
Kazakhstan
Kenya
Kiribati
Korea
Kosovo
Kuwait
Kyrgyzstan
Laos
Latvia
Lebanon
Lesotho
Liberia
Liechtenstein
Lithuania
Luxembourg
Macau, China
Macedonia
Madagascar
Malawi
Malaysia
Maldives
Mali
Malta
Marshall Islands
Martinique
Mauritania
Mauritius
Mayotte
Mexico
Micronesia
Moldova
Monaco
Mongolia
Montenegro
Montserrat
Morocco
Mozambique
Myanmar
Namibia
Nauru
Nepal
Netherlands
Netherlands Antilles
New Caledonia
New Zealand
Nicaragua
Niger
Nigeria
Niue
Norfolk Island
Northern Mariana Islands
Norway
Oman
Pakistan
Palau
Palestine
Panama
Papua New Guinea
Paraguay
Peru
Philippines
Pitcairn Islands
Poland
Portugal
Puerto Rico
Qatar
Reunion
Romania
Russia
Rwanda
Saint Barthélemy
Saint Helena
Saint Kitts and Nevis
Saint Lucia
Saint Martin
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
San Marino
Sao Tome and Principe
Saudi Arabia
Senegal
Serbia
Seychelles
Sierra Leone
Singapore
Sint Maarten
Slovakia
Slovenia
Solomon Islands
Somalia
South Africa
South Georgia and The South Sandwich Islands
Spain
Sri Lanka
State of Libya
Sudan
Suriname
Svalbard and Jan Mayen
Swaziland
Sweden
Switzerland
Syrian Arab Republic
TaiWan, China
Tajikistan
Tanzania
Thailand
The Republic of Croatia
Togo
Tokelau
Tonga
Trinidad and Tobago
Tunisia
Turkey
Turkmenistan
Turks and Caicos Islands
Tuvalu
Uganda
Ukraine
United Arab Emirates
United Kingdom
United States
United States Minor Outlying Islands
Uruguay
US Virgin Islands
Uzbekistan
Vanuatu
Vatican City State
Venezuela
Vietnam
Wallis and Futuna Islands
Western Sahara
Western Samoa
Yemen
Zambia
Zimbabwe

* Postal Code

Phone

Fax

Subject

* Message

* Verification code